Veneered Particle Board

Veneered-Particle-Board2

Commercial Face veneer or Decorative Teak Veneer is machine bonded on plain particle board. The particle board used as the base is manufactured by ‘Graded Construction Technology’ in which there is a gradual merging of the density gradient between the surface and the core. Teak veneer or commercial face veneer is hotpressed under controlled temperature and pressure resulting in the formation of Teak Veneered or Commercial Face Veneered particle boards, with reduced mechanical stress, warpage and zero deformation. This ensures a superior aesthetic appeal to the decorative veneered surface. The above is manufactured under strict quality standards as prescribed in the ISI framework.

 

Applications
Display Panels, Partitioning, Furniure, Decorative Structure, Heavy Duty Racks, Panel Door Inserts.
Std.Thickness (mm):
6, 9, 12, 18, 25
Standard Sizes (ft):
8×3, 6×4, 6×3. 6×2.5 Combination Size(ft):(8×4 & 8×2)

 

 

Technical Specifcations

Property Unit ISI Specifications IS : 3097 – 1980 (EXT) Tested Results
EXT RG EXT RG
Density Kg/m3 500-900 500-900 700-750 700-750
Internal Bond                     N/mm2 0.45 0.30 0.70 0.60
Water Absorption Percent
2hrs 25 25 15 18
20 hrs                     50 50 25 29
Thickness Swelling                    
2 hrs Soaking                     Percent
Thickness                     7 7 4 5
Mobulus of rupture                     Kg/cm2 300 300 320 320
Moisture Content                     Percent 7-16 7-16 8 8
3 hours boiling water Resistance                     Should not disintegrated                     Withstands