TECHNICAL SPECIFICATIONS (Post Forming) | Plywood |Veneer Wood | Laminates in India

S.No. Properties Unit Specified value
as per IS 2046:1995,Type P,VGP
Archidlam Conforms
1 Thickness mm 0.6 mm ± 0.10 mm
2 Length mm 2440 mm + 10mm/-0mm
3 Width mm 1220 mm + 10mm/-0mm
4 Resistance to surface wear Revolution 150 (Min.)
5 Resistance to immersion in boiling water                                                                                a) Mass increase

b) Thickness increase

c) Appearance



21.0 (Max.)

23.0 (Max.)

Not worse than 3

6 Dimensional stability at deviated temperature

a) Longitudinal

b) Transverse





0.70 (Max.)

1.20 (Max.)

7 Dimensional stability at 200C

a) Longitudinal

b) Transverse




0.47 (Max.)0.75 (Max.)
8 Resistance to impact by small diameter ball Newton 15 (Min)
9 Resistance to cracking Grade Not worse than 4
10 Resistance to scratching Newton 1.75 (Min.)
11 Resistance to staining

a) Group 1 & 2

b) Group 3 & 4

GradeGrade Not worse than 5Not worse than 3
12 Resistance to colour change

a) In Xenon arc light

b) In enclosed Carbon arc light

GradeGrade Not worse than 6Not worse than 5
13 Resistance to steam Grade Not worse than 3
15 Formability Radius (in mm) 10 (Min.)
16 Resistance to blistering Sec. 10 (Min.)
14 Appearance —- Should be free from foreign particle

USEFUL TIPS FOR HANDLING, STORAGE, MAINTENANCE & CARE | Plywood |Veneer Wood | Laminates in India

1) Storage & Handling:
Store laminate sheets horizontally by turning top sheet face down and caul board placed on top to protect the material
from possible damage and reduce the chance of warpage. Protect the sheets from the moisture and never store in contact
with the floor or wall. Always lift sheets from one point to another, never slide sheets on the decorative surface.
2) Care & Protection:
a) Harsh Chemicals:
Oven or toilet/drain cleaner may etch and discolor the laminate surface. In case of spillage of these chemicals,
remove immediately, rinse and wipe dry.
b) Hot Object:
Though laminate have high heat resistance, do not place hot pans or dishes directly from oven or cook top on the laminate surface.
Use a trivet or insulated pad to protect the surface from the heat generating appliances.
c) Sharp Object:
Never use knives or other sharp object on the decorative surface. Use a chipping block or counter saver to protect the laminate surface.
d) Impact:
Do not drop heavy object or hammer on the laminate surface. Though it has excellent impact resistance, chipping or cracking may occur.
3) Prolong its Original Appearance:
Laminate sheets require minimal maintenance. Just follow these simple tips to maintain luminous shine and attractive appearance.
a) To clean the surface, use a damp cloth or sponge and a mild soap or detergent.
b) Difficult stains such as coffee and tea can be removed using a mild house hold cleaner or detergent.
c) If the stain persists use the paste of baking soda and water and apply with soft bristled brush. Remember not to do excessive scrubbing
or exert too much force which may lead to damage of surface particularly if it is a gloss finish.

WARRANTY | Plywood |Veneer Wood | Laminates manufacturer in India




Note: Archidply Industries Limited warrants that all its products are free from manufacturing defects and fit for use under normal conditions.

In case of any claims, the liability of the company is however limited to the cost of product only.

This warranty shall not apply to the defects or damage arising from any of the following.


1.       Accidents or misuse.

2.       Exposure to extreme temperatures.

3.       Improper fabrication and installation techniques.

4.       Improper maintenance.